High-voltage trapezoidal pulses output with nanosecond rising edge for controlling an electro-optical Q-switch in solid-state lasers.
Features
- Operating in “shelf” mode with rise time less then 2 ns
- Low voltage (5 V) power supply
- Built-in pulsed high-voltage source
- Reduced electro-magnetic noise due to bipolar HV pulse relative to common ground
- Positive logical level trigger 3 ÷ 8 V
- Output pulse amplitude adjustment by built-in potentiometer or by external signal
- Additional output signal for HV-pulse amplitude measurement
- Highly reliable topology
- Ultra-compact design and light weight
| Quantity | Price |
|---|---|
| 5 - 10 | $840.75 |
| 11 - 15 | $796.50 |
| 16 - 20 | $752.25 |
| 21 + | $708.00 |
*Quantity discounts will be applied in the cart
Specifications
| Output voltage amplitude: | |
|---|---|
| ● PCD-21-2500 | 1600 ÷ 2500 V |
| ● PCD-21-2900 | 2200 ÷ 2900 V |
| ● PCD-42-3800 | 3000 ÷ 3800 V |
| Output voltage pulse-to-pulse instability | 1 % |
| Max pulse current | 20 A |
| Max load capacitance | 20 pF |
| Rise time | 1 ÷ 2 ns |
| Hold time | 0.5 ÷ 1 μs (0.5 μs) |
| Decay time | 3 ÷ 6 μs |
| Max HV pulse repetition rate | 4 kHz |
| Trigger voltage (input impedance is 200 Ohms) | 3 ÷ 8 V (5 V) |
| Output pulse delay vs. trigger pulse | 10 ÷ 15 ns |
| Timing jitter of output HV pulse vs. trigger | < 0.1 ns |
| Supply voltage | 4.5 ÷ 5.5 V (5 V) |
| DC supply current at maximum output pulse voltage | |
| ● at a repetition rate of 1 kHz | 220 mA |
| ● at a repetition rate of 2 kHz | 300 mA |
| ● at a repetition rate of 4 kHz | 460 mA |
| Operating temperature range | -40 ÷ +60 °C |
| Dimensions | 30 × 50 × 8 mm3 |
| Mounting hole pattern (Ø 3.2 mm) | 24 × 44 mm |
